SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jib
Industrial Jib - Lift truck jibs enable the operator to reach over obstructions with a purpose to place their very heavy heaps on decks, roofs and even raised platforms. They're typically used to reach through second and third story doorways and windows to pick up and transfer loads to areas still under construction. Fork truck jibs are really utilized so as to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also typically used for reaching over scaffolding for masonry work.
Each and every jib boom forklift attachment consists of a pair of rotating hooks. One hook can be manually fixed to any area on the boom's bottom and the second hook is fitted at the end of the jib. This allows the individual operating it to be able to lift any load that has two hook points. Dependent on the size of the model, every hook is rated at either 4 thousand or 6 thousand pounds It's possible to make use of either one hook or even both to carry a load. The individual operating it should make sure that the entire weight of the jib and the load will not exceed the rated capability of the jib as shown on the load chart for that retracted or extended position.
Attachments jibs can be utilized on extendable-reach forklifts, rough terrain straight-mast forklifts and on industrial forklifts. The forklift jib cranes can be installed onto the forklift by way of inserting both of the forks into the fork pockets. The back of the jib crane then seats towards the rear of the fork and a safety chain wraps the forklift carriage to hold it into position.
Load Capacity for the Jib Boom Forklift Attachment
The maximum load capacity for forklift jibs in both the extended or retracted positions range from 1935 pounds to 6000 lbs. It is a good suggestion to ask a material handling specialist about the restrictions for your particular use. The load capacity ratings are meant for the jib itself and not the forklift or the maximum load which could be lifted safely using a particular lift truck. It is essential to remember that every time any attachments such as a lift truck jib are connected to the lift truck, the new center of gravity made by the accessory would lessen the general lift capability of the forklift. There are directions obtainable that offer details on how to properly determine these load limits.
Safe Usage of your Fork Lift Attachment & Fork Trucks
Before the use of whatever forklift jib, be sure that the hooks and shackles are properly secured to the lift truck. Be sure and also double check that the pins are tight. It is very important that the weight calculations have been correctly made and double checked. Bear in mind to take into account the truth that rated capacities at times lessen every time the boom is in an elevated position, whenever the boom is extended with telehandlers or even whenever the mast is slanted frontward.
A few significant pointers concerning the modifiable jib are: do not ever pull a load using a lift truck jib attachment, because these types of attachments are really used for vertical lift only. At all times carry the load without letting it swing. Use extreme caution every time a load is lifted so as to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 512-642-5697
402 A WEST PALM VALLEY BLVD 249
Round Rock, Texas
forkliftpartsroundrock.com
Email Us
About Us